1. Product Description: Warehouse push back racking system, also known as push-in shelve racks, are one of the high-density storage racking systems, suitable for the storage of small and large quantities of goods. According to the principle of "first in, last out", the system places the goods on the inclined rolling track, the carrying trolley runs along the track, and the pallet is placed on the carrying trolley and pushed back to the inside of the rack in turn. The effective depth is 4 pallet positions. After picking up the first pallet, the next pallet slides to the pickup point by itself, effectively using a single channel for access, and it is especially suitable for storage management in the cargo transit area.
2. Heavy duty Push-back racking characteristics: • Suitable for warehouses with a high unit cost per warehouse area, such as cold storage. • Can provide 20% -30% pickability. • Both safety and operating efficiency are higher than drive-in shelves (through shelves). • Compared with ordinary shelves, it can improve the usage rate of about 60% on the ground. • Only need to set forward forklift or counterweight forklift can be used, and the forklift operation requirements are lower than drive-in (through type).
3. Components of push-back racks: The main accessories of Warehouse push back racking system are composed of posts, beams, rails, and trolleys. Post: There are two posts connected with cross braces and diagonal braces through special screws. The cross section of the posts is the same as that of pallet racks. In order to meet different loading requirements, the beams can be adjusted up and down the shelf height by 75mm. Beam: In order to ensure that the beams fall off under the abnormal external force, the anti-falling safety pin connected to the beams and posts is specially designed to ensure the safety of use. Track: Specially made rectangular track, in order to meet the continuous operation of the carriage and the track, a more wear-resistant galvanized treatment is adopted. Carriage trolley: Welded according to the size of the pallet. The four wheels with special four corners must meet the requirements for the movement of the cargo.
Audited Supplier 
){kind=link}