Rack Blind Corner Warning System with Infrared Induction Sensor Collision Sentry

Product Description

1.  The product introduction

At the corners, intersections in warehouses and parking lots, etc., because pedestrians or drivers cannot see whether there are people or vehicles passing around the corner, collisions often occur, which poses a great safety hazard to people and property. In view of this, there is an urgent need for an intelligent warning device to alert pedestrians or drivers who are about to pass through a corner or intersection to avoid collision accidents.

For example, when workers in a warehouse are working and encounter a corner of a shelf, if there are workers on both sides of the corner of the shelf and some of them walk fast, it is easy to cause a collision accident, especially when the worker holds a heavy hand. Too much cargo may easily cause injuries to workers and damage to products after collision. In addition, forklifts are commonly used transportation vehicles in warehouses. Forklifts are dangerous to workers during operation and need to keep a certain distance from workers. If the forklift or workers do not get out of the way in time, it is easy to cause safety accidents, especially in warehouses. When there are many and dense shelves, the sight of the forklift driver or other staff is blocked by the shelves, making it impossible to avoid them in time, making it difficult to ensure the safety of the operation.

Function introduction

2. Function introduction

2.1 It is composed of an LED light and a pedestrian sensing system. If a pedestrian or vehicle passes by, a signal will be sent out quickly within 8 meters. The LED light will automatically light up and sound a warning sound. It has a built-in large battery with long battery life. It can be connected with magnets or hooks to adjust the height freely.

2.2 When the corner alarm receives the start information from the controller, it will send out an audible and visual alarm signal.

2.3 When pedestrians or vehicles such as forklifts pass by on either side, a signal is quickly sent out within the sensing range, and the LED lights on both sides automatically turn green.

When pedestrians or vehicles pass by at the same time on both sides, a signal is quickly sent out within the sensing range, and the LED lights on both sides automatically turn on red and sound a warning sound.

Parameters

3. Product parameters

Product model:BGB-001	Buzzer volume:≥90db, rechargeable
Sensing range:0~8m	Battery life: 1 year
Induction frequency:24G millimeter wave radar sensor	Overall dimensions:165mm*96mm*256mm
Product weight:1.5kg	Installation height:1.5~2m
Installation method: magnetic or hanging	Installation height:1.5~2m
Buzzer volume:≥90db	Operating temperature range:-10ºC~+60ºC

 

Advantages

4. Product advantages

4.1 High-precision probe, conical three-dimensional scanning perimeter, wide environmental coverage, distance up to 8 meters

4.2 Excellent signal penetration to avoid dust accumulation, which reduces the sensitivity of the probe.

4.3 Traditional batteries are replaced once every six months on average, but this battery does not need to be replaced for a year.

4.4 U-shaped groove, magnet adsorption, sensitive and convenient, the height and position can be adjusted at any time as needed.

4.5 Using LED lights as light source, it is energy-saving and environmentally friendly, effectively extending battery life and reducing energy consumption.

4.6 Intelligent temperature control can automatically sense the ambient temperature and adjust the status to ensure stable operation under extreme temperature conditions.

After Sales Service

5. Quality and service

This product provides one-year warranty service. If there are product quality problems during the warranty period, you can contact after-sales service at any time, and we will provide you with the most professional technical support and solutions!